Saturday, April 19, 2025

Shock Index

Explaining shock index (SI)

Shock index (SI) is the ratio of heart rate (HR) to systolic blood pressure (SBP), expressed in beats per minute over mmHg. A normal resting SI is about 0.5 to 0.7 in healthy adults. When there's hypovolemia or shock, SI increases, providing an earlier warning than HR or SBP alone. It helps in risk stratification for conditions like trauma, sepsis, or MI. Thresholds above 0.7 signal abnormality, and values over 1.3 suggest high risk or need for interventions. However, it's limited in certain conditions like beta-blockade or hypertension.

Shock Index (SI) = heart rate ÷ systolic blood pressure
e.g. 110 beats min⁻¹ ÷ 100 mm Hg = 1.10 (unit‑less)


Why it matters physiologically

When circulating volume falls or systemic vascular tone drops, the body tries to maintain cardiac output by raising heart rate while SBP drifts downward. The ratio changes earlier than either vital sign alone, so SI flags occult shock before frank hypotension appears. 


What the number tells you

Range (adult) Typical interpretation Clinical evidence/examples
0.5 – 0.7 Normal resting SI in healthy adults
> 0.7 Early hemodynamic stress; prompts closer monitoring Predicts need for intervention in ED sepsis cohort. 
≥ 0.9 Abnormal—high likelihood of compensated shock Used as escalation trigger in obstetric hemorrhage guidelines. 
≥ 1.0 Decompensation imminent; higher ICU admission & mortality Linked to massive‑transfusion requirement after trauma. 
≥ 1.4–1.7 Severe shock; urgent resuscitation needed Strong predictor of adverse outcome in postpartum hemorrhage and septic shock meta‑analyses. 

Key clinical uses

  • Trauma & hemorrhage – SI > 0.9 at arrival identifies patients who will need massive transfusion or operative control even when vital signs look “normal.” 

  • Sepsis – Persistently elevated SI after fluids correlates with progression to septic shock, vasopressor requirement, and increased 28‑day mortality. 

  • Post‑partum hemorrhage – Obstetric protocols use SI ≥ 0.9 for transfer/activation and ≥ 1.3–1.7 for calling massive‑bleed teams. 

  • Myocardial infarction, pulmonary embolism, stroke – SI adds prognostic discrimination over SBP or HR alone. 


Practical points & limitations

  • Trend it. A rising SI is often more informative than any single value.

  • Age or pediatric adjustment. In children SI normally runs higher; the SIPA score uses age‑specific cut‑offs. 

  • Confounders. β‑blockers, pacemakers, atrial fibrillation, high spinal cord injury, or severe pain/anxiety can mask or exaggerate SI.

  • Derived variants. Modified SI (HR ÷ MAP), Delta‑SI (arrival vs. prehospital), and Age‑SI (SI × age) may improve accuracy in specific settings but are not yet widely adopted.

Take‑home: Shock index is a quick bedside metric that integrates heart rate and systolic blood pressure into a single early‑warning number—values ≥ 0.9 signal compensated or overt shock and should trigger an immediate search for bleeding, sepsis, cardiogenic failure, or other causes, plus aggressive resuscitation and monitoring.

Explaining Sepsis Reassessment

What the chart auditors are looking for

Under the CMS SEP‑1 six‑hour bundle, any patient who is still hypotensive after the 30 mL kg‑¹ bolus or whose initial lactate is ≥ 4 mmol L‑¹ must have a “repeat volume‑status and tissue‑perfusion assessment” completed and documented by an LIP before the 6‑hour clock runs out. If that note is missing or incomplete, the entire case fails the measure. 

Auditors often key on boiler‑plate phrases such as “Sepsis reassessment completed”—but the note must also satisfy one of the three documentation pathways below.


1. Focused exam (the classic five‑bullet exam)

A single attestation that the LIP performed a repeat focused exam after the fluid bolus and documented all five of these items:

  1. Vital signs

  2. Cardiopulmonary exam

  3. Capillary‑refill time

  4. Peripheral‑pulses assessment

  5. Skin findings

If any of the five bullets is missing, the element fails.


2. Review of ≥ 5 of the 8 CMS‑listed parameters

Instead of a physical exam, the LIP may state that they reviewed at least five of the following eight data points:

  • Vital signs

  • Cardiopulmonary assessment

  • Capillary‑refill

  • Peripheral pulses

  • Skin colour/condition

  • Arterial O₂ saturation

  • Urine output

  • Shock index (HR/SBP)

Example text that passes:

“Sepsis reassessment completed 14:12. Reviewed VS, cardiopulmonary exam, cap‑refill < 2 s, peripheral pulses 2+, skin warm, UO 45 mL h‑¹.” 


3. Any 2 of 4 hemodynamic tests

The LIP may instead document that they obtained or interpreted two of these:

  • Central‑venous pressure (CVP)

  • Central‑venous oxygen saturation (ScvO₂)

  • Bedside cardiovascular ultrasound (IVC or LV filling)

  • Dynamic fluid‑responsiveness test (passive‑leg‑raise or 250‑mL fluid challenge)

Example:

“Reassessment 15:05 – CVP 10 mm Hg; PLR ↑ stroke volume 16 %. No further fluid indicated.” 


Practical documentation tips

Tip Why it helps
Use an EHR smart phrase such as “.sepsisreassessment” that auto-populates all five bullets
or prompts you to pick the 8‑parameter route.
Prevents missing elements.
Time‑stamp the note after the bolus but before 6 h. Auditors match it to the bundle clock.
If nurses collect pulses or urine output, the LIP must explicitly state they reviewed those RN findings. RN data alone doesn’t count.

Bottom line:
Sepsis reassessment completed” only meets SEP‑1 when the note shows either the five‑bullet focused exam, or review of ≥ 5 of CMS’s eight surrogate parameters, or two hemodynamic tests—documented by an LIP and time‑stamped within the 6‑hour window. Anything less will be marked non‑compliant.



Featured Post

Fourth Universal Definition of Myocardial Infarction

The following are key points to remember from this Expert Consensus Document on the Fourth Universal Definition of Myocardial Infarction (M...